Transformer Distribution Box 6AS
Product descriptionThe distribution box is designed for switching and protecting the electric motors of the blowout from short circuit and overload. The housing of the junction box has a cylindrical shape, made of sheet steel. The housing of the junction box 6AS 361.003-01 is covered with a shock-moisture-oil-resistant powder-polymer coating. Color grey (shagreen) RAL 7035. At the request of the customer, the case can be painted in a different color. There are holes on the wall and bottom of the junction box, into which PG21 type seals are mounted, designed to seal the box in places where the cable passes through them. At the request of the customer, instead of oil seals, introductory couplings for metal sleeves can be installed in the transformer junction box. From above, the box is hermetically sealed with a lid using rubber gaskets. A DIN rail with two three-pole circuit breakers for connecting cables of electric blowing motors is installed on the panel of the junction box.
– Box installation type – external;
– Voltage – 220/380 V, 50 Hz;
– Climatic version according to GOST 15150 – UHL1;
– Degree of protection according to GOST 14255 – IP44;
– Type of circuit breakers – 3P 6A.